Geist 이지 필러 코놀리 사용 가이드

Geist 이지 필러 코놀리 희석비 pH 스펙 카드

Easy Filler Connolly

가이스트 이지 필러 코놀리는 코놀리 색상 코드에 맞춘 액상 가죽 충전제로, 재색상 작업 전 가죽 및 비닐 표면의 깊은 균열·스크래치·마찰 손상을 보수합니다. 천연 가죽 결 질감을 재현하며 접촉 즉시 단단히 밀착되고 건조 후에도 유연성을 유지해 색상 복원 작업의 이상적인 기반이 됩니다.

브랜드
Geist
카테고리
Interior : Leather Sealants
pH
neutral (8)
구매(한국)
쿠팡에서 검색
최종 업데이트
2026-06-27

공개 성분

성분CAS역할
triethylamine121-44-8pH 조절제
2-methylisothiazol-3(2H)-one2682-20-4보존제
cute 1, 1,2-benzisothiazol-3(2H)2634-33-5보존제
Reaction mass of CMIT and MIT (3:1)55965-84-9보존제

제조사 물질안전보건자료(SDS)에 공개된 성분입니다. SDS는 유해성 분류 대상 성분만 기재하므로 전 성분 목록이 아닙니다.

핵심 특징

  • 가죽 및 비닐의 깊은 균열·스크래치·마찰 손상 보수
  • 액체 가죽 결처럼 작용
  • 도포 후 강한 접착력
  • 건조 후 유연성 유지
  • 스웨이드·누벅·벨루어·마이크로파이버 표면에는 사용 불가
  • 추가 평탄화 작업 시 가이스트 디졸브로 습식 샌딩 가능

사용법

  1. 가이스트 서피스 프렙으로 유분과 오염을 깨끗이 닦아낸 후 건조시킵니다. 테이프 테스트로 손상 부위의 접착력을 확인하고, 접착이 되지 않으면 재세척합니다. 가이스트 레더 샌딩 패드로 원형 동작으로 가볍게 샌딩 후 먼지를 제거합니다.
  2. 튜브 팁을 손상 부위에 눌러 충전제를 도포합니다. 손가락이나 평평한 도구로 표면을 고르게 펴고, 열을 가하지 않고 천천히 건조시킵니다.
  3. 더욱 매끄러운 결과를 위해 건조된 충전제를 가이스트 디졸브로 습식 샌딩합니다.
  4. 보수 부위가 완전히 건조되면 제공된 지침에 따라 가이스트 이지 컬러 리스토러를 도포합니다.

Geist Easy Filler Connolly is a liquid leather filler matched to Connolly colour codes, used to repair deep cracks, scratches, and friction damage on leather and vinyl surfaces prior to recolouring. It mimics natural leather grain texture, bonds firmly on contact, and stays flexible once dried, creating the ideal foundation for colour restoration work.

Key features

  • Repairs deep cracks, scratches, and friction damage on leather and vinyl
  • Works like a liquid leather grain
  • Strong adhesion after application
  • Remains flexible after drying
  • Not suitable for suede, nubuck, velour, or microfibre surfaces
  • Can be wet-sanded with Geist Dissolve for additional smoothing

Usage

  1. Wipe off grease and soiling with Geist Surface Prep, let dry, then perform a tape test on the damaged area. If tape does not adhere, reclean. Lightly sand with Geist Leather Sanding Pad in circular motions and remove dust.
  2. Press the tube tip into the damaged area and apply the filler. Smooth with a finger or flat tool and allow to dry slowly at room temperature without applying heat.
  3. For a smoother result, wet-sand the dried filler with Geist Dissolve.
  4. After the repair has dried, apply Geist Easy Colour Restorer to the repaired area following the supplied instructions.

다른 이름: 가이스트, Geist Easy Filler Connolly, Geist EFC, 가이스트 이지 필러 코놀리

View in English

출처

  • Geist 공식 제품 페이지
  • 물질안전보건자료 (SDS / MSDS)

관련 제품

Geist의 다른 제품

  • Leather Preserver
  • Easy Filler McLaren
  • Easy Colour Restorer
  • Leather & Vinyl Paint - Alfa Romeo
  • Leather Conditioner
  • Leather & Vinyl Paint - Ford

같은 카테고리(Leather Sealants) 제품

  • CarCandy Leather Refresh Conditioning Interior Lotion
  • Shiny Garage Leather Mousse
  • Lunatic Polish Feather Soft Leather Coat
  • OPTI-COAT Opti-Guard Leather Ceramic Coating Non-Warranty
  • Chemical Guys Leather Conditioner
  • Garage Therapy /TWO: Leather Protect

더 보기

  • 카테고리·비교·희석 가이드
  • 디테일러가 실제로 쓰는 제품 (영상 분석)