러버 클레이 스탠다드

Rubber Clay Standard

차량 도장면에 박힌 철분, 도장 미스트 등 각종 부착물을 제거하는 전용 고무 오염 제거 크로스입니다. 스탠다드 모델은 PRO 버전보다 내화학성이 높아 스무서(윤활제)와 함께 사용하기에 적합하며, 필요 시 소모품으로 사용할 수 있도록 가격이 합리적으로 설정되어 있습니다.

브랜드
Ganbass
카테고리
Tools : Wash Supplies

핵심 특징

사용법

  1. 시공 대상 도장면을 세차하여 진흙이나 오염물을 미리 제거합니다.
  2. 클로스 고무면을 세정하여 이물질이 없는지 확인합니다.
  3. 시공면에 물 또는 스무서를 분무하면서 클로스 고무면을 도장면에 가볍게 대고 균일하게 움직여 부착물을 제거합니다.
  4. 물이나 스무서가 마르지 않도록 지속적으로 보충하며 패널별로 작업을 진행합니다.
  5. 사용 후 클로스를 충분히 세정하고 스무서가 마르기 전에 물기를 제거합니다.

A specialty rubber decontamination cloth designed to remove embedded iron particles, paint overspray, and other bonded surface contaminants from vehicle paint. The Standard model offers greater chemical durability than the PRO version, making it more compatible with concurrent use of chemical smoothers (lubricants), and is priced to allow near-disposable use when working with aggressive chemicals.

Key features

  • Removes iron particles, paint mist, and bonded surface contaminants
  • Higher chemical durability than the PRO model for use with smoothers
  • Cost-effective enough for near-disposable use with aggressive chemicals
  • Flat surface design without holes (instructions available for scratch-minimizing technique)
  • Compatible with chemical smoothers such as car shampoo

Usage

  1. Wash the target paint surface and remove mud and dirt beforehand.
  2. Clean the rubber face of the cloth and confirm it is free of contaminants.
  3. Spray water or a smoother solution onto the surface, then gently glide the rubber face across the paint in even strokes to remove bonded particles.
  4. Continue working in sections, keeping the surface continuously lubricated with water or smoother so it does not run dry.
  5. After use, rinse the cloth thoroughly and wipe away any remaining smoother before it dries.

다른 이름: 간바스, ganbas, Ganbass Rubber Clay Standard, 간바스 Rubber Clay Standard, 간바스 러버 클레이 스탠다드, 鉄粉除去ラバークロス スタンダードモデル

View in English

출처