메탈 프로텍션
Metal Protection
Metal Protection은 메르세데스-벤츠, BMW 등 유럽 차량의 아노다이징 처리 몰딩을 비롯한 금속 소재 전용으로 개발된 경화계 코팅제입니다. 금속 면에 강한 보호 피막을 형성하여 부식 자국 생성을 억제하며, 부식 자국은 한 번 생기면 제거가 매우 어렵고 비용이 높으므로 예방이 최선입니다.
- 브랜드
- Ganbass
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU
핵심 특징
- 금속 소재 전용 제형
- 아노다이징 몰딩의 부식 자국 생성 예방
- 유럽 차량 트림(메르세데스, BMW)에 특히 효과적
- 금속 면에 내구성 있는 강한 피막 형성
- 도포 후 닦아내는 간편한 시공 방법
희석 비율
- Exterior : Coating — RTU (1:0) (기본)
사용법
- 금속 표면에 오염물이 없는지 확인합니다.
- 손 크기로 자른 얇은 디테일 클로스, 코튼, 또는 키친 페이퍼에 적당량을 적십니다.
- 금속 몰딩에 고르게 바릅니다.
- 3~5분 후 마이크로파이버 클로스로 잔여분을 닦아 마무리합니다. 이후 최소 2시간은 접촉하거나 물에 닿지 않도록 합니다.
Metal Protection is a hardening coating developed exclusively for metal surfaces, particularly anodized molding on European vehicles such as Mercedes-Benz and BMW. It creates a strong protective film on metal trim to resist corrosion staining, which is notoriously difficult and expensive to remove once established.
Key features
- Formulated exclusively for metal surfaces
- Prevents corrosion staining on anodized molding
- Particularly effective on European vehicle trim (Mercedes, BMW)
- Creates a durable hard film on metal
- Simple apply-and-wipe application method
Usage
- Confirm that the metal surface is free of dirt and contaminants.
- Apply an adequate amount to a thin detail cloth cut to hand size, a cotton pad, or a paper towel.
- Work the product into the metal molding.
- Wait 3–5 minutes, then wipe off the excess with a microfiber cloth to finish. Avoid contact and water for at least 2 hours afterward.
다른 이름: 간바스, ganbas, Ganbass Metal Protection, MP, Ganbass MP, 간바스 메탈 프로텍션