지비에스 더블유

GBS-W

GBS-W는 자동차 창유리 전용 수용성 초미립자 연마제로, 손으로 닦아도 연마 흔적 없이 유막과 경미한 물때를 제거하도록 설계되었습니다. 실리콘과 왁스가 없어 물로 간단히 헹굼이 가능하며, 별도 탈지 작업 없이 유리 코팅 전 하지 처리에 바로 활용할 수 있습니다.

브랜드
Ganbass
카테고리
Exterior : Glass Cleaner

핵심 특징

사용법

  1. 세차하여 모래, 먼지, 이물질을 제거합니다.
  2. 마이크로파이버 클로스를 손 크기로 잘라 적당량을 묻힌 후, 20cm 사방 정도의 구역을 한 구역당 10~20초 기준으로 가볍게 눌러 닦습니다.
  3. 어느 정도 닦은 후 물기를 꽉 짠 젖은 클로스로 닦아보면, 유막이 제거된 곳은 친수 상태가 되고 유막이 남은 곳은 발수 상태로 확인할 수 있습니다.
  4. 전체 유막 제거가 완료되면 물로 헹구거나 깨끗한 클로스를 물로 짜서 클로스를 2~3회 이상 헹구면서 연마제 잔여물이 남지 않도록 깨끗이 닦아냅니다.

GBS-W is a water-soluble, ultra-fine abrasive polish for automotive window glass, developed to remove oil films and light scale deposits by hand without leaving polish marks. Being silicone-free and wax-free, it rinses clean with water and requires no dedicated degreasing step, making it the ideal pre-treatment before glass coating.

Key features

  • Ultra-fine water-soluble abrasive for window glass
  • Removes oil films and light scale by hand
  • Silicone-free and wax-free — rinses clean with water
  • No separate degreasing step needed
  • Can also be used with a polisher
  • Usable on paint surfaces, door-handle scratches, and side mirrors
  • Ideal pre-treatment before glass coating

Usage

  1. Wash the vehicle and remove sand, dust, and surface contaminants.
  2. Cut a microfiber cloth to a hand-sized piece, apply a suitable amount of the product to it, and polish the glass surface gently in approximately 20 cm × 20 cm sections for about 10–20 seconds per section, using light pressure.
  3. At an appropriate point during polishing, wipe with a damp wrung-out cloth to check progress. Areas where the oil film has been removed will appear hydrophilic, while remaining areas will still bead water.
  4. Once the entire surface is clean of oil film, rinse with water or wipe thoroughly with a clean cloth wrung from water, rinsing the cloth at least 2–3 times to remove all abrasive residue.

다른 이름: 간바스, ganbas, Ganbass GBS-W, 간바스 지비에스 더블유

View in English

출처