케미컬 클레이 중고차용

Chemical Clay Used

주로 중고차 도장 하지 처리용으로 설계된 범용 디테일링 클레이 바로, 철분·페인트 미스트 등 도장에 박힌 이물질을 제거합니다. 간바스는 어떤 클레이든 연마제 유무와 관계없이 반드시 클레이 스크래치가 생기므로 전문가 기준으로 연마를 전제로 사용해야 한다고 안내합니다.

브랜드
Ganbass
카테고리
Tools : Wash Supplies

핵심 특징

사용법

  1. 세차로 모래를 제거한 후, 샤워 수류를 흘리면서 클레이를 도장면에 부드럽게 밀어줍니다. 클레이 접촉면이 평평하게 유지되도록 하여 불필요한 스크래치를 방지합니다.
  2. 이후 연마 계획이 없는 경우 클레이와 도장면에 세차 샴푸를 소량 사용해 윤활성을 높이고 클레이 스크래치를 줄일 수 있습니다.
  3. 눈에 보이는 큰 철분은 클레이를 작게 잘라 해당 부위만 부분적으로 처리하여 주변 깨끗한 도장에 스크래치가 생기지 않도록 합니다.

An all-purpose detailing clay bar formulated primarily for used-car paint preparation, capable of removing iron particles, paint mist, and other embedded surface contaminants. Ganbass notes that any clay bar — regardless of abrasive content — will leave clay marks, so polishing after use is the professional baseline.

Key features

  • Removes iron particles, paint mist, and embedded contaminants
  • All-purpose formulation for used-car prep
  • Contains abrasive components (always leaves clay marks — polishing required)
  • Provides useful surface keying before polishing on used cars

Usage

  1. After washing to remove loose sand, run water from a shower hose over the surface and glide the clay gently across it. Keep the clay face flat against the paint to avoid unnecessary scratching.
  2. If no subsequent polishing is planned, apply a small amount of car shampoo to the clay and the paint to improve lubrication and reduce clay marks.
  3. For visible large iron particles, cut the clay into a smaller piece and treat those spots locally to avoid marring surrounding clean areas.

다른 이름: 간바스, ganbas, Ganbass Chemical Clay Used, 간바스 케미컬 클레이 중고차용, ケミカル粘土

View in English

출처