Ethos Car Care 퍼펙트 폴리시 희석비 & 사용 가이드

Ethos Car Care 퍼펙트 폴리시 희석비 pH 스펙 카드

Perfect Polish

삼중 여과된 다이미니싱 입자를 사용해 가벼운~중간 결함을 다듬어 스월 없는 광택 마감으로 정리해주는 마감용 폴리시입니다. 필러와 실리콘이 없는 수성 처방이라 결과가 그대로 드러나며, 세라믹 코팅 전 마지막 단계로 사용합니다. 작업 시간이 길고 닦아내기가 쉬워 모든 도장 타입에 활용할 수 있습니다.

브랜드
Ethos Car Care
카테고리
Exterior : Polishes
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 가벼운 결함은 오렌지 폼 폴리싱 패드, 중간 결함은 원스텝 마이크로파이버 패드를 DA 폴리셔에 장착합니다.
  2. 마이크로파이버 패드는 가볍게 프라이밍하고, 폼 패드에는 콩알 크기 3~4방울을 떨어뜨립니다.
  3. 약 60cm × 60cm 구획을 중간 속도, 가볍거나 중간 압력, 느린 팔 움직임으로 작업합니다.
  4. 겹쳐가며 4~6회 패스 후 압력 없이 가벼운 마무리 패스를 한 번 더 진행합니다.
  5. 깨끗한 마이크로파이버로 잔여물을 닦고, 코팅 전 단계라면 패널 와이프나 IPA로 한 번 더 닦아냅니다.

Finishing polish that uses triple-filtered diminishing abrasives to refine light to moderate paint defects toward a swirl-free, glossy finish. Water-based, filler-free, and silicone-free so the result is true correction rather than masked. Long working time and easy wipe-off make it a fit as the final step before a ceramic coating.

Key features

  • Diminishing fine-cut finishing polish
  • Refines light to moderate defects
  • Water-based, filler and silicone free
  • Suited as coating-prep finishing step
  • Long working time and easy wipe-off

Usage

  1. Choose an orange foam polishing pad for light defects or a one-step microfiber pad for moderate defects on a DA polisher.
  2. Prime a microfiber pad with a light smear, or use 3 to 4 pea-size drops on a foam pad.
  3. Work a 2 ft by 2 ft section at medium speed with light to moderate pressure and slow arm movement.
  4. Make 4 to 6 overlapping passes and finish with a single no-pressure pass to refine the surface.
  5. Wipe residue with a clean microfiber, then panel-wipe with IPA if prepping for coating.

다른 이름: 에토스, 이토스, ethos, Ethos Perfect Polish, PP, Ethos PP, 에토스 퍼펙트 폴리시, 에토스 PP

View in English

출처

관련 제품

Ethos Car Care의 다른 제품

같은 카테고리(Polishes) 제품

더 보기