타르 & 글루 리무버
Tar & Glue Remover
카랩 타르 & 글루 리무버는 차량 외장 도장면에서 타르, 접착제, 송진을 녹여 제거하는 바로 사용 가능한 용제형 제품입니다. 정기적인 제염은 물론 갓 묻은 오염에도 적합하며, 고성능 포뮬러가 굳은 도로 오염물을 빠르고 손쉽게 분해합니다. 비접촉 방식으로 작동해 기계적인 문지름이 필요 없으며, 처리하는 도장면을 손상시키지 않도록 설계되었습니다. 전문가용 제품이며, 고무나 연질 플라스틱에는 사용하지 마십시오.
- 브랜드
- CARLAB
- 카테고리
- Exterior : Remover
- 기본 희석 비율
- RTU
핵심 특징
- 바로 사용 — 희석 없이 원액 그대로 도포
- 차량 외장 도장면의 타르·접착제·송진 제거
- 비접촉 작용으로 문지름 없이 오염물 분해
- 정기 제염과 갓 묻은 오염 모두에 적합
- 지시대로 사용 시 도장면에 안전하도록 설계
- 전문가용 강력 포뮬러
- 고무 및 연질 플라스틱에는 사용 불가
희석 비율
- Exterior : Remover — RTU (1:0) (기본)
사용법
- 깨끗하고 건조한 차체에 제품을 도포합니다.
- 10~30분간 그대로 둡니다.
- 고압수로 충분히 헹궈냅니다.
- 희석하지 않고 원액 그대로 사용하며, 고무나 연질 플라스틱에는 도포하지 않습니다.
Carlab Tar & Glue Remover is a ready-to-use solvent for dissolving tar, glue and resin from automotive bodywork. Built for both routine decontamination and fresh deposits, its advanced formula lifts stubborn road grime quickly and with minimal effort, working touchlessly so no mechanical scrubbing is needed. It is formulated to clear contaminants without harming the painted surfaces being treated, and is intended for professional use. Not suitable for rubber or soft plastic.
Key features
- Ready to use — apply undiluted, no mixing required
- Removes tar, glue and resin from automotive bodywork
- Touchless action dissolves deposits without mechanical scrubbing
- Suited to both periodic decontamination and fresh contamination
- Formulated to be safe on treated paintwork when used as directed
- Professional-grade strength
- Not for use on rubber or soft plastic
Usage
- Apply the product to clean, dry bodywork.
- Leave it to dwell for 10 to 30 minutes.
- Rinse thoroughly with pressurized water.
- Use undiluted (ready to use); do not apply to rubber or soft plastic.
다른 이름: car lab, 카랩, Carlab Tar & Glue Remover, CARLAB Tar & Glue Remover, Tar and Glue Remover, TGR, Carlab TGR, 카랩 타르 글루 리무버, 타르 글루 리무버, 카랩 TGR