Autofiber 어플라이코트 사용 가이드

Autofiber 어플라이코트 희석비 pH 스펙 카드

Appli-Coat

어플라이코트는 세라믹 코팅, 실란트 등 도장 보호 제품을 도포하기 위한 스웨이드 마이크로파이버 어플리케이터 패드입니다. 가볍고 얇은 80/20 스웨이드 마이크로파이버 소재로 제품 흡수는 최소화하면서 도장, 플라스틱, 트림 표면에 고르게 펴 발라줍니다. 가장자리가 내부로 봉제되어 있어 부드러운 마이크로파이버 면만 표면에 닿습니다.

브랜드
Autofiber
카테고리
Tools : Wash Supplies
최종 업데이트
2026-07-21

핵심 특징

사용법

  1. 패드의 세 면 중 한쪽에 코팅 제품을 몇 방울 떨어뜨립니다.
  2. 코팅 제조사의 지침에 따라 도포하고, 한 면이 다 사용되면 다음 면으로 넘어갑니다.
  3. 세 면을 모두 사용한 후에는 세탁하거나 재사용하지 말고 폐기합니다.
  4. 코팅 제품이 피부에 묻지 않도록 고무장갑을 착용합니다.

Appli-Coat is a suede microfiber applicator pad designed for spreading ceramic coatings, sealants, and other paint protection products. Made from lightweight 80/20 suede microfiber, it absorbs minimal product while distributing an even layer across paint, plastic, and trim. The edges are sewn inside the pad so only the smooth, soft microfiber contacts the surface.

Key features

  • Suede microfiber surface for even coating application
  • Lightweight 200gsm material absorbs minimal product
  • Three usable sides per pad, sewn-in edges
  • Single-use, discard after coating cures

Usage

  1. Apply a few drops of coating onto one of the three flat sides of the pad.
  2. Spread as directed by the coating manufacturer, then switch to the next side once one is saturated.
  3. Discard the pad after all three sides have been used; do not launder or reuse.
  4. Wear rubber gloves to avoid getting coating on skin.

다른 이름: 오토파이버, AUTOFIBER Appli-Coat, 오토파이버 어플라이코트

View in English

출처

관련 제품

Autofiber의 다른 제품

같은 카테고리(Wash Supplies) 제품

더 보기