Auto Glym 폴라 블래스터 사용 가이드

A foam cannon designed to fit domestic pressure washers and dispense the Autoglym Polar Series products. It builds a thick clinging foam with adjustable mix and spray patterns for pre-wash, wash and seal steps. It uses a dedicated reservoir bottle rather than a pick-up pipe and ships with a Karcher K-Series compatible connector.

Key features

• Foam cannon for domestic pressure washers
• Adjustable foam thickness dial
• Adjustable spray pattern nozzle
• Dedicated reservoir bottle
• Karcher K-Series compatible connector
• Built for the Autoglym Polar Series

Usage

1. Attach the pickup tube to the brass nozzle on the underside of the foam gun head.
2. Attach the connector to the hand gun on the pressure washer.
3. Connect the foam gun head to the connector by pulling back its brass collar.
4. Dilute the Polar product to the rate shown on the reservoir bottle.
5. Screw the foam gun head onto the bottle.
6. Trigger the pressure washer at the floor until foam feeds through.
7. Set foam thickness with the dial and the spray pattern with the nozzle.
8. Apply the foam to the vehicle.
9. Rinse the reservoir between products.
10. Flush the unit with clean water after use.