Alchimy7 D7 희석비 & 사용 가이드

Alchimy7 D7 희석비 pH 스펙 카드

폼 랜스·캐논·스프레이건용 농축 생분해성 프리워시로, 강력한 거품 성분이 내장되어 별도 스노우폼 첨가제가 필요 없습니다. 매우 지저분한 차체에서도 오염·노면 필름·정전기 먼지를 제거합니다. 순한 pH로 기존 합성 왁스를 손상하지 않습니다.

브랜드
Alchimy7
카테고리
Exterior : Pre-washing (Pretreatment)
기본 희석 비율
1:24~1:200
최종 업데이트
2026-07-10

핵심 특징

희석 비율

용도희석비율
Exterior : Pre-washing (Pretreatment) (기본)1:24~1:2001:24-200

사용법

  1. 물(가급적 따뜻한 물)로 희석한 뒤 고압세척기 탱크나 폼 캐논/랜스 저장통에 붓습니다.
  2. 차량 전체에 용액을 분사한 뒤 2~3분간 그대로 둡니다.
  3. 약 2미터 거리에서 진한 거품이 나오도록 유량을 조절하며 고압세척기로 헹구고, 마르지 않도록 주의합니다.
  4. 필요하면 이어서 일반 세차를 진행합니다.

A concentrated, biodegradable pre-wash for foam lance, cannon or spray gun with strong built-in foaming agents, so no snow-foam additive is needed. It lifts dirt, road film and static dust even from very dirty bodywork. Mild pH preserves existing synthetic wax.

Key features

  • Concentrated formula for foam lance/cannon/spray gun
  • Effective on very dirty bodywork
  • Strong built-in foaming agents
  • No snow-foam additive needed
  • Mild pH preserves synthetic wax
  • Biodegradable

Usage

  1. Dilute with water (ideally warm) and pour the mixture into the pressure washer tank or foam cannon/lance reservoir.
  2. Spray the solution over the entire vehicle and let it dwell for 2 to 3 minutes.
  3. Rinse with a pressure washer, spraying from about 2 meters and adjusting flow for a dense foam; do not let it dry.
  4. Follow with a traditional wash if needed.

다른 이름: 알키미7, 알키미, Alchimy, Alchimy7 D7, D7 Prélavage, 알키미7 D7, P-102

View in English

출처

관련 제품

Alchimy7의 다른 제품

같은 카테고리(Pre-washing (Pretreatment)) 제품

더 보기