ADBL 하드 컷 희석비 & 사용 가이드

ADBL 하드 컷 희석비 pH 스펙 카드

Hard Cut

깊은 스크래치와 P1000~P1500 샌딩 자국을 제거하는 고성능 컷팅 컴파운드입니다. 실리콘이 없는 수성 포뮬러로 모든 도장 유형에 쓰이며, 로터리나 듀얼 액션 머신과 울, 폼, 마이크로파이버 패드에 모두 맞고, 단단한 도장면에서는 1단계 교정으로도 활용할 수 있습니다.

브랜드
ADBL
카테고리
Exterior : Polishes
기본 희석 비율
RTU
pH
neutral (7)
최종 업데이트
2026-07-06

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 배킹 플레이트에 패드를 고르게 부착합니다.
  2. 패드 위에 컴파운드를 4줄 도포합니다.
  3. 패드를 작업할 패널에 평평하게 밀착시킵니다.
  4. 머신을 가장 낮은 속도로 켜고 압력 없이 최대 40x40 cm 면적에 펴 바릅니다.
  5. 속도를 3~4단으로 높이며 서서히 압력을 가합니다.
  6. 패드를 도장면에 평평하게 유지하며 지속적으로 작업합니다.
  7. 컴파운드가 투명한 막으로 변하면 부드러운 마이크로파이버 천으로 잔여물을 닦아냅니다.

A high-performance cutting compound that removes deep scratches and P1000 to P1500 sanding marks. The water-based, silicone-free formula works on all paint types with rotary or dual-action machines and wool, foam, or microfibre pads, and can act as a one-step correction on harder paints.

Key features

  • Removes deep scratches and P1000-P1500 sanding marks
  • Water-based, silicone-free, filler-free and wax-free
  • Works with rotary and dual-action machines
  • Compatible with wool, foam, and microfibre pads
  • Can serve as one-step correction on harder paints
  • Good finishing for a smooth result

Usage

  1. Attach the pad evenly to the backing plate.
  2. Apply four beads of compound onto the pad.
  3. Place the pad flat against the panel to be treated.
  4. Run the machine at the lowest speed without pressure and spread over a maximum 40x40 cm area.
  5. Increase to gear 3-4 while gently adding pressure.
  6. Work continuously, keeping the pad flat against the paint.
  7. When the compound turns to a transparent film, remove residue with a soft microfibre cloth.

다른 이름: ADBL Hard Cut, HC, ADBL HC, 에이디비엘 하드 컷, ADB000432

View in English

출처

관련 제품

ADBL의 다른 제품

같은 카테고리(Polishes) 제품

더 보기